CDL Tank Vehicles Test 2 – Classic Mode

This is CDL Tank Vehicles Test 2 in our original Classic Mode. Simply click in your answer to each CDL practice test question. When you're finished, check your score and results. You can reset the test and retake it as needed.

Start Test #2 Now

1. You should observe the posted limits for curves and be aware that...

A Tank trucks have a higher center of gravity
B The posted speeds may not be slow enough for a tank truck
C A rollover can still occur when traveling at posted speeds in a tank truck
D All of the above

2. A smooth bore tank is another term for...

A A liquid tank without baffles
B A liquid tank with baffles
C A tank made of stainless steel
D A tank which is portable

3. The amount of liquid you should put into the tank depends on...

A The amount the liquid will expand in transit
B The weight or density of the liquid
C Legal weight limits
D All of the above

4. Outage is defined as...

A The process of liquid expansion as it becomes warm
B The liquid that must be drained to conform to weight limits
C The loss of power to the hydraulics
D The loss of headlights on the tractor

5. When driving a smooth bore tanker combination, be especially cautious...

A While ascending a hill
B While descending a hill
C When starting and stopping
D When loading or unloading

6. When the tanks are partially filled, the movement of the liquid is called...

A Surging
B Waves
C Splashing
D Rocking

7. Hauling tank vehicles requires special skills because...

A The center of gravity is higher
B The vehicle is top heavy
C The load's weight is high up off the road
D All of the above

8. Dividers inside tankers that have openings at the top and bottom are called...

A bulkheads
B baffles
C waffles
D barriers

9. Baffles in a tanker...

A make the tanker easier to clean out
B control forward and backward liquid surge
C allow you to haul mixed loads
D eliminate side to side surge

10. The driver should pay particular attention to the _________ on smaller tanks.

A Higher center of gravity
B Weight distribution
C Level of fluid
D All of the above

End of Test #2

Test Score =

Correct Answers:

Switch Testing Modes Here

Take this same test in our other testing modes ...